DESCRIPTION:
Single component, polymer modified cementitous honeycombs and pinhole filler.
USES:
For application to minor imperfections in concrete and masonry surface up to 5mm
DOSAGE / CONSUMPTION COVERAGE/YIELD:
6.0m2 @ 3mm thickness
DESCRIPTION:
Free flow, cementations shrinkage compensated micro concrete with fiber reinforcement.
USES:
Strengthening of access restricted reinforced concrete elements in various structural strengthening situations where self compaction is desired. Rebuilding or encasements of existing structural elements needs from work. Sealing of precast elements for structural continuity.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
13.8 liters / 25 kg Bags
DESCRIPTION:
Single component, general purpose shrinkage controlled, polymer modified, cementations structural patch repair mortar system.
USES:
General purpose polymer modified repair mortar for vertical and overhead patch repairs of concrete and masonry elements. Rendering of honey combed concrete. For doing patch repairs by hand or trowel application, where from work cannot be erected.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
13.8 liters / 25 kg bags 1.85 kg / m2 / mm
DESCRIPTION:
Single component polymer modified fiber reinforced cementations patch repair mortal for floor.
USES:
Polymer modified repair mortal for vertical and overhead patch repairs of concrete elements suitable for re-instatement of spelled cover concrete due to corrosion of reinforcing steel by carbonation. Application up to 40 mm thick in one layer.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
20 Kg / m2 @ 10mm thickness
DESCRIPTION:
High Strength underwater cementitous Micro concrete for repair with anti-washout & non shrink properties.
USES:
For repair of damaged underwater or tidal zone concrete structures like concrete piling, pillars, dams, bridge columns, jetty walls etc.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
17.5 ltr / 25 kg bag
DESCRIPTION:
2 Pack thixotropic, polymer modified cementitous patching and adhesive mortar.
USES:
Used for thin layer applications to seal surface cracks up to 5 mm, blow holes, honeycombs to give a smooth level finish.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
2.15kg / sqm / 1mm thickness
DESCRIPTION:
Rapid setting cement based water leak plugging mortar.
USES:
For rapid temporary patching and plugging of concrete segments, concrete and brick tunnel linings, sewage systems, below ground access chambers, pipes, basements, foundations and mines.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
Yield : 0.55 ltrs / kg
DESCRIPTION:
Epoxy resin based putty for underwater repairs
USES:
For fillings of blowholes, sealing cracks for underwater grouting, eliminating minor irregularities on concrete surfaces in damp and underwater conditions.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
1 Liter / m2 @ 1 mm thickness
DESCRIPTION:
Singles component, high durable, shrinkage compensated, micro cement based injection slurry.
USES:
Grouting of post tensioned cable ducts, porosities in concrete, sealing of cracks in cemntitious sections, walls, stones, and consolidation of porous or incoherent conglomerates.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
1.65 kg / Ltr
DESCRIPTION:
Epoxy resin based patch repair mortar both clear and pigmented versions are available.
USES:
For lining ETP, STP and chemical tanks, cavity or port hole repairs on factory floors, garages, repairing dams, (pointing) spillways, etc. where abrasion resistance is required along with high strength.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
2.0m2 @ 5mm thickness / pack
DESCRIPTION:
Epoxy resin based 2-component high strength injection grout for very small gaps between 0.2-10mm. moisture insensitive epoxy injection grout also available.
USES:
For injecting into cracks, honeycombs and cavities in concrete structures. It can also be used for grouting base plates with very narrow gaps having deep penetration and dynamic load resistance. It has good chemical resistant properties and bonding strength to most contact surface.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
Yield: 0.95 ltr/ kg
DESCRIPTION:
Flexible polyurethane injection foam for inhibiting continuous water infiltration.
USES:
To stop high water intrusion into cracks, joints and cavities in concrete underground structures with deep penetration owing to its low viscosity.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
Depends on the concrete porosity.
DESCRIPTION:
Multipurpose acrylic polymer for waterproofing and repair system.
USES:
Bathroom, toilet and terrace waterproofing, repair mortar, injection grouting, bonding agent, heavy duty or natural stone structures with deep penetration owing to it slow viscosity.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
5.7 kg for 50 kg cement when used as a polymer modified repair mortar.
DESCRIPTION:
Multipurpose acrylic polymer for waterproofing and repair system.
USES:
Bathroom, toilet and waterproofing, repair mortar, injection grouting, bonding agent, heavy duty floor topping, polymer modified concrete.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
5.7 kg for 50 kg cement when used as a polymer modified repair mortar.
DESCRIPTION:
Non-Explosive Expansion Demolition grout.
USES:
Specially designed for demolition of concrete, rock and boulders in environmentally sensitive areas where vibration must be minimized. It is suitable for controlled splitting of concrete, rock, boulders and natural stones accomplished smoothly and efficiently with superior yield in short time.
DOSAGE / CONSUMPTION COVERAGE/YIELD:
Refer Technical Data Sheet